Printer Profile Instructions
PLEASE FOLLOW ALL INSTRUCTIONS CAREFULLY. If you do not read and follow all instructions, your profile may not work properly.
- Open Adobe Photoshop[tm]
- Open BOTH Printing Targets: RGBtargetpart1.tiff and RGBtargetpart2.tiff
For both images:
- If asked, choose "Leave as is (don't color manage)"
- You may rotate the images, but do NOT change anything else
- Choose the "Print with Preview" Option
- Under "Color Management: Source Space", the "Document" option should be set to "Untagged RGB"
- Under "Color Management: Print Space" the "Profile" option should be set to "Same As Source"
- Click "Print"
- Print box will open, click "Properties"
- Select "Best Photo"
- Under Paper Options select closest match to paper type using
- Under Orientation select "Landscape"
- Click "Advanced" tab
- Set Resolution on setting that you would normally be using
- Under "Color Management" select "ICM"
- Under "ICC Profile" select "No Color Adjustment"
- Click "Ok" and then "Ok"
- For best results, center images on Letter size (8 1/2 x 11") paper
- Print out both Targets
- Allow to fully dry
- Place the targets between two pieces of cardboard, so as not to bend
Mail to:
Gregg L. Vicik
335 59th. Street
Newport News, Virginia
23607
Thank you for using our Printer Profile Service!